Industrial Sheet Metal Rack Electric Telescoping Cantilever Pipe Warehouse Rack

High quality warehouse pipe racking systems

Telescopic Cantilever Racking Systems For Aluminium Profiles

Aluminium loves to bite back. A single speck of embedded steel becomes a permanent furrow once the protective film is peeled. We line every arm with 6 mm PVC that compresses under load, swallowing grit before it meets the profile. Need more? Swap the strip for felt or UHMW in 30 seconds—no tools, no lost capacity. The uprights are punched on 100 mm centres so you can store 40 mm window gaskets one metre apart and 200 mm structural beams the next, all in the same tower.

Category Heavy Duty Cantilever Racking System Tag Telescopic Cantilever Racking Systems For Aluminium Profiles

Herochu Telescopic Cantilever Racking for Aluminium Profiles
From USD 4,399 | CE • UE • ISO 9001 | Delivered in 3 weeks

Store 6 m, 9 m, even 12 m extrusions in a footprint smaller than a parking space and pull any single profile in under 45 seconds—without climbing, without levers, without scratching anodised surfaces. That is the only metric that matters when your press is waiting for the next length and the courier is already idling at the gate.

Traditional cantilever racks force you to unload three bundles before you reach the one at the back. Our telescopic arms roll out a full 800 mm—100 % extension—so an overhead crane or vacuum lifter can descend straight onto the target profile and leave the rest untouched. Think of it as a vertical tool chest where every drawer is strong enough to carry a city bus.

The heart of the system is a cold-rolled steel carriage running on sealed cam bearings. A 5 t load moves with 18 Nm of hand torque—roughly the effort of turning a car steering wheel. Push-button automation is optional: a 0.75 kW brake motor extends each arm in 22 seconds and locks it with ±2 mm repeatability. Either way, only one arm can be open at a time; a mechanical interlock prevents the tip-over hazard that insurers hate to see.

Density is where the rack earns its keep. A double-sided HC-G9055D tower—1.3 m wide, 9 m long—hosts 42 t of metal yet needs only one 1.5 m service aisle. Compare that to fixed cantilever racks that demand 3.5 m aisles on both sides and the floor-space saving crosses 60 %. One customer in Ontario reclaimed 1,800 m², enough to install two new CNC saws and still park the forklift fleet indoors.

Expansion is bolt-on, not knock-down. Join a starter bay to an add-on and the moment joint uses four bolts rated at 45 kN each—no sleeve, no weakening. Grow from 3 m to 12 m height by splicing columns; every splice ships pre-milled and includes fish-plates. Arms can be added or removed while the rack is loaded; slide the carriage to the maintenance position, knock out the taper pin, drop in the new arm, done. Your storage grows with your next contract instead of waiting for next year’s budget.

We quote five pre-configured kits, yet most towers are specials. Need 550 mm arms for 40 mm square tube? Done. Need 800 mm arms rated at 6 t for 400 mm wide curtain-wall sections? Done. The PLC brain stays identical across the range—your maintenance team learns once. A 10-inch colour HMI shows which arm is extended, live weight, and maintenance counters. Tie it into your ERP and the rack will refuse to release a profile until the work order is scanned—traceability without paperwork.

Safety is engineered, not bolted on afterwards. Each arm carries a 3-position lock: closed, 50 % vent, 100 % extended. A spring-loaded detent prevents accidental roll-out during crane pick. The base plate is 12 mm thick and slotted for M20 chemical anchors; pull-out tests show 72 kN per bolt, enough for seismic zone 4. If you run an automated bridge crane, photo-eyes across the face shut off travel when an arm is open—no human memo required.

Installation respects the only clock that matters—yours. Columns arrive in 3 m modules, arms pre-assembled. Two fitters, one scissor lift, four hours: the tower is plumb, anchored, and ready for metal. No pit, no fire-suppression upgrade, no permit nightmare. If you relocate, reverse the process and reinstall across town the same afternoon; the asset travels with you, not with the concrete.

Return on investment is brutal math. A 6 t bundle of 6063-T5 extrusion costs roughly USD 18,000. Scratch one face and the anodiser rejects it; you lose material, labour, and machine time—about USD 25,000 per incident. Eliminate one rejection per quarter and the HC-G9055D pays for itself in 14 months. Factor in denser storage, faster saw change-overs, and the ability to quote just-in-time deliveries, and payback typically lands under 8 months. After that the rack is a profit centre, not a depreciation line.

Telescopic cantilever racking is no longer a luxury for high-end facades; it is the only sane way to handle long aluminium in a market that punishes late ships and scratched profiles. Store once, retrieve untouched, deliver perfect. Herochu turns the chaos of bundles into a vertical library where every book opens at the press of a button—and that, in the aluminium business, is the fastest route to a margin that lasts.

Q1: What steps should I take to start the procurement process?

You may get in touch with our backend technical staff first. Based on your specific parameters, we will formulate a suitable technical solution and provide a quotation. Alternatively, you can leave your contact details—such as WhatsApp, WeChat, or email address—and our professional sales team will reach out to you proactively.

Q2: How can I inform you of my need for suitable shelves?

You can share key information with us, including the type of items you plan to store on the shelves, the dimensions of those items, the quantity of shelves required, and any other specific details you have. With this information, we will develop a professional solution tailored to your needs. If you prefer, you can also leave your contact information, and our specialized team will contact you to address your questions.

Q3: Should I choose a loading robotic arm or an integrated loading and unloading system?

To determine the right option, two key factors need to be considered first:

The table size of your laser cutting machine must meet the matching requirements for the equipment.
We need to know your specific loading method—whether it is a board rack, exchange platform, or material warehouse.

For a more accurate recommendation based on your specific needs, please leave your contact information, and we will provide targeted service.

Q4: Do you offer on-site installation and debugging services?

Yes, we do. We can dispatch professional technicians to your factory to carry out on-site installation and debugging of the robotic arm, and we will continue working until the equipment completes a successful trial operation. Our team has provided such services in many countries, including South Africa, the United States, Russia, South Korea, Qatar, Egypt, Lebanon, and Mexico.

Q5: What measures do you take to ensure product quality?

We have a comprehensive quality assurance system, supported by the following key measures:

A team of over 40 technical engineers, with professional mechanical engineers responsible for debugging equipment and resolving any technical concerns.
A dedicated quality inspection department that strictly adheres to ISO9001 quality standards, ensuring all products meet the required quality specifications.
Professional CE certification, which guarantees smooth export procedures for our products to global markets.
Mandatory load testing for all equipment before shipment, ensuring the structural safety and operational stability of each product.

Q6: Where is your factory situated?

Our factory is located in Jinan, Shandong Province, China, specifically at No. 10 Industrial Park, Jiyang Street. It features a modern, standard workshop covering an area of 10,000 square meters.

Q7: How can I verify your company’s strength?

We offer two convenient ways for you to assess our company’s capabilities:

We can arrange a video tour of our factory, allowing you to remotely view our production environment and facilities.
We warmly welcome you to visit our factory in person for an on-site inspection.

Q8: What type of company are you?

We are Jinan Constant Storage Machinery Manufacturing Co., Ltd., a high-tech enterprise that integrates research and development, production, sales, installation, and after-sales service. Our core product range includes intelligent sheet metal material warehouses, drawer-type sheet metal shelves, telescopic cantilever shelves, servo swing arm manipulators, gantry loading and unloading manipulators, fully automatic loading and unloading systems, and heavy-duty sheet metal and pipe storage shelves. Equipped with a professional technical team and advanced production equipment, we are committed to providing high-quality, high-performance mechanical products and customized solutions to customers around the world.