Vertical Sheet Metal Rack Storage Systems Provider

Residual material rack for vertical sheet metal storage

Vertical Sheet Metal Rack Storage Systems Provider

If every Monday morning starts with a treasure hunt for that one 2 mm stainless sheet buried under three weeks of random remnants, it’s already costing you money. Herochu’s Vertical Sheet Metal Rack ends the hunt by turning dead aisle space into a clean, pull-out library where every plate is visible, reachable, and safe from forklift bumps. One operator, one handle, 30 seconds—sheet is out, job is running, invoice is printing.

Category Sheet Metal Storage Racks Tag Vertical Sheet Metal Rack Storage Systems Provider

Herochu Vertical Sheet Metal Rack Storage Systems
Store More Sheets in 40 % Less Floor Space—Starting at $5,000, CE/ISO Certified, Tailor-Made for Your Workshop

Picture a steel exoskeleton standing only 1.2 m deep yet holding up to 25 drawers, each rated for 1 t of sheet or plate. Instead of leaning material against a wall or stacking it on the floor, you slide the drawer toward you like a vertical filing cabinet. Gravity keeps the sheets upright; the angled floor of the drawer keeps them from sagging. When the drawer is extended 100 %, even a 12 ft carbon-steel plate is fully exposed for immediate lifting by magnet, vacuum, or hook. No extra manpower, no second forklift, no scratching adjacent sheets.

Stock models ship in fifteen days, but every dimension is negotiable. The HC-V2010-15 swallows 2 000 × 1 000 mm sheets in fifteen drawers and needs only 2.7 m × 2.46 m of floor. Step up to the HC-V3015-15 and you house 3 000 × 1 500 mm stock in the same footprint depth. Need twenty drawers? Six hundred millimetres of compartment height? An extra-wide 4 000 × 2 000 mm bay for ship-building plate? Send us the nesting list—our laser line will cut side frames to the millimetre while you finish your coffee.

The backbone is 5 mm structural steel, robot-welded and powder-coated RAL 5012 as standard. Tracks are 6 mm cold-rolled rail, induction-hardened to 55 HRC and running on sealed ball-bearing rollers rated for fifty thousand cycles at one hundred and twenty-five percent load. Polyurethane-coated casters lock individually, so the rack stays planted when a drawer is out. A mechanical stop every two hundred millimetres prevents accidental roll-out, and an optional gas spring neutralises the weight of three-metre drawers so one hand is enough to move them.

Floor-space maths is brutal for anyone paying industrial rent. A typical job-shop stores one hundred and fifty tonnes of 4 × 8 ft sheets on two hundred and eighty square metres. Replace those leaning stacks with three HC-V3015-25 units and you store the same tonnage in twenty-seven square metres—an eighty-eight percent floor-space rebate. At twelve euros per square metre, the savings alone finance the racks before the next tooling order.

Remnants stop disappearing the moment each drawer receives its movable divider bars. Slide the bars to create two-hundred-millimetre pockets, label the face with QR tags, and your nesting software can query location in real time. No more ghost inventory that shows on the ERP but vanished behind the shear.

This is not a painted shelving unit from a catalogue. Every frame ships with a full traceability packet: mill test certificates, weld maps, ball-bearing batch numbers, and coating adhesion reports. CE marking under the Machinery Directive, ISO 9001:2015 certification, and a UE Declaration of Performance mean the rack is insurable anywhere in the world.

Installers like the simplicity: the unit arrives pre-assembled on steel feet, needs only M16 anchor bolts into one-hundred-and-fifty-millimetre concrete, and takes less than ninety minutes from truck to first loaded sheet. Maintenance is a ninety-second roller wipe-down once a month and five millilitres of lithium spray twice a year. Expected life is twenty-five years at one shift per day, two hundred and fifty days per year. Spare parts ship within seventy-two hours globally, and drawers are hot-swappable without unloading.

Users like the speed. A Stuttgart HVAC fabricator cut overtime eleven percent the first quarter after installing Herochu racks. A Chengdu aerospace plant stores titanium sheets in six custom four-metre-high units and reports zero coating galling after eighteen months of eight-hundred-and-eighty-kilogram loads.

Expansion is just as easy. Side frames are modular; unbolt the top cap, slide in new drawer bays, tighten, and expansion is done in two hours. Tilted low-profile options let the same number of drawers fit under a three-metre ceiling, and nylon-tipped dividers swap in when the stock is plastic, wood, or polished aluminium composite.

Accessories turn the rack into a micro fulfilment centre. LED strips glued to the drawer throat switch on automatically when extended. Rubber-mat inlays protect polished stainless from fork scratches. Magnetic sheet separators pop up twenty millimetres so one person can slide out a single ten-millimetre plate. A foot-switch-controlled vacuum lifter mount bolts to the base frame and picks three hundred kilograms without a second worker.

If the numbers still feel abstract, plug your own data into the ROI calculator we provide: annual sheet turnover, rent per square metre, labour cost, forklift hours. The spreadsheet returns pay-back month, net present value, and CO₂ reduction from eliminated forklift trips. A typical mid-size fabricator sees a fourteen-month pay-back, one-hundred-and-forty-eight-thousand-euro ten-year savings, and forty-two fewer tonnes of carbon emissions.

The guarantee is simple. Install the rack, use it for ninety days. If it does not save you at least one paid hour per week, we pick it up and refund one hundred percent—including freight. No restock, no questions, no fine print.

Stop restacking. Start producing. Herochu turns every sheet into an address you can visit in under thirty seconds.

Q1: What steps should I take to start the procurement process?

You may get in touch with our backend technical staff first. Based on your specific parameters, we will formulate a suitable technical solution and provide a quotation. Alternatively, you can leave your contact details—such as WhatsApp, WeChat, or email address—and our professional sales team will reach out to you proactively.

Q2: How can I inform you of my need for suitable shelves?

You can share key information with us, including the type of items you plan to store on the shelves, the dimensions of those items, the quantity of shelves required, and any other specific details you have. With this information, we will develop a professional solution tailored to your needs. If you prefer, you can also leave your contact information, and our specialized team will contact you to address your questions.

Q3: Should I choose a loading robotic arm or an integrated loading and unloading system?

To determine the right option, two key factors need to be considered first:

The table size of your laser cutting machine must meet the matching requirements for the equipment.
We need to know your specific loading method—whether it is a board rack, exchange platform, or material warehouse.

For a more accurate recommendation based on your specific needs, please leave your contact information, and we will provide targeted service.

Q4: Do you offer on-site installation and debugging services?

Yes, we do. We can dispatch professional technicians to your factory to carry out on-site installation and debugging of the robotic arm, and we will continue working until the equipment completes a successful trial operation. Our team has provided such services in many countries, including South Africa, the United States, Russia, South Korea, Qatar, Egypt, Lebanon, and Mexico.

Q5: What measures do you take to ensure product quality?

We have a comprehensive quality assurance system, supported by the following key measures:

A team of over 40 technical engineers, with professional mechanical engineers responsible for debugging equipment and resolving any technical concerns.
A dedicated quality inspection department that strictly adheres to ISO9001 quality standards, ensuring all products meet the required quality specifications.
Professional CE certification, which guarantees smooth export procedures for our products to global markets.
Mandatory load testing for all equipment before shipment, ensuring the structural safety and operational stability of each product.

Q6: Where is your factory situated?

Our factory is located in Jinan, Shandong Province, China, specifically at No. 10 Industrial Park, Jiyang Street. It features a modern, standard workshop covering an area of 10,000 square meters.

Q7: How can I verify your company’s strength?

We offer two convenient ways for you to assess our company’s capabilities:

We can arrange a video tour of our factory, allowing you to remotely view our production environment and facilities.
We warmly welcome you to visit our factory in person for an on-site inspection.

Q8: What type of company are you?

We are Jinan Constant Storage Machinery Manufacturing Co., Ltd., a high-tech enterprise that integrates research and development, production, sales, installation, and after-sales service. Our core product range includes intelligent sheet metal material warehouses, drawer-type sheet metal shelves, telescopic cantilever shelves, servo swing arm manipulators, gantry loading and unloading manipulators, fully automatic loading and unloading systems, and heavy-duty sheet metal and pipe storage shelves. Equipped with a professional technical team and advanced production equipment, we are committed to providing high-quality, high-performance mechanical products and customized solutions to customers around the world.